Next Steps: Accelerated Vault Zone Delineation

During the Fall 2025 and Winter 2026 season, Talon’s fully crewed, three-rig drilling campaign will continue the targeting of BHEM plates to determine:

• The lateral extent of massive sulphide and mixed massive sulphide stacks of accumulations of sulphides intercepted in drill holes 16TK0250, 25TK0565 and 25TK0563 (see left side of the conceptual cross section in Figure 2);
• The potential for similar massive sulphide and mixed massive sulphide stacks on the opposite side of the intrusion, an area with no prior drilling (see right side of the conceptual cross section in Figure 2); and
• Additional accumulation of massive sulphides and mixed massive sulphide stacks at greater depths by following the near-vertical BHEM plate from 16TK0248 deeper into the Vault Zone, potentially beyond 300 meters below the deepest massive sulphide intercept to date.

Successive drill targets will be refined based on ongoing geological and geophysical insights.

“Geophysically speaking, the initial borehole electromagnetic (BHEM) results from the Vault Zone appear analogous to the geometry of the Reid Brook Zone at Voisey’s Bay, where I worked for over five years,” said Brian Bengert, Talon’s VP Geophysics. “What’s particularly exciting is the clear contrast between the near-vertical, lower-conductivity feature, interpreted as a pathway connecting the accumulations, and the high-conductivity plates that define the accumulations themselves. This conductivity contrast should significantly improve the speed and accuracy of exploration.  A single vertical drill hole with multiple directional daughter holes should be able to efficiently delineate several lateral extensions of these sulphide traps.”  

“Unlike the Tamarack Resource Area, where massive sulphide mineralization typically forms as a single laterally continuous accumulation on either side of the intrusion (see plan view in Figure 1), the Vault Zone shows multiple accumulations of massive sulphides—each with potential for lateral extension,” said Brian Goldner, Talon’s Chief Exploration and Operations Officer. “Importantly, tenor and grades increase with depth, with the highest nickel, copper and Cu:Ni ratios—and the most intense bornite and chalcocite veining—ever observed at the Tamarack Nickel-Copper Project.”

“With only a subset of our team at Tamarack, we’ve completed seven holes to target depth in the Vault Zone that delivered some of the highest-grade nickel-copper intercepts drilled in the last century—but that’s still just seven holes in a vast area,” said Henri van Rooyen, CEO of Talon. “Now that our Michigan team has returned to Tamarack for the Fall 2025 and Winter 2026 season, we’ve established three drill pads directly above the Vault Zone, enabling 360-degree directional drilling that saves roughly 2,000 meters per pad compared to drilling each hole from surface. We’re now positioned to follow each massive sulphide stack laterally and continue tracing the same pattern to greater depths—while also testing the opposite side of the intrusion for additional stacks of high-grade nickel-copper-PGE mineralization.”

For further discussion on the Vault Zone, please see www.talonmetals.com/media.

QUALITY ASSURANCE, QUALITY CONTROL AND QUALIFIED PERSONS

Please see the technical report entitled “November 2022 National Instrument 43-101 Technical Report of the Tamarack North Project – Tamarack, Minnesota” with an effective date of November 2, 2022 (“November 2022 Technical Report”) prepared by independent “Qualified Persons” (as that term is defined in National Instrument 43-101 (“NI 43-101”)) Brian Thomas (P. Geo), Roger Jackson (P. Geo), Oliver Peters (P. Eng) and Christine Pint (P.G) for information on the QA/QC, data verification, analytical and testing procedures at the Tamarack Nickel Copper Project. Copies are available on the Company’s website (www.talonmetals.com) or on SEDAR at (www.sedar.com). The laboratory used is ALS Minerals who is independent of the Company. 

Lengths are drill intersections and not necessarily true widths. True widths cannot be consistently calculated for comparison purposes between holes because of the irregular shapes of the mineralized zones. Drill intersections have been independently selected by Talon. Drill composites have been independently calculated by Talon. The geological interpretations in this news release are solely those of the Company. The locations and distances highlighted on all maps in this news release are approximate.  

Dr. Etienne Dinel, Vice President, Geology of Talon, is a Qualified Person within the meaning of NI 43-101. Dr. Dinel is satisfied that the analytical and testing procedures used are standard industry operating procedures and methodologies, and he has reviewed, approved and verified the technical information disclosed in this news release, including sampling, analytical and test data underlying the technical information. 

Where used in this news release:

NiEq% = Ni% + Cu% x $4.00/$8.00 x Cu Recovery/Ni Recovery + Co% x $20.00/$8.00 x Co Recovery/Ni Recovery + Pt [g/t]/31.103 x $1,000/$8.00/22.04 x Pt Recovery/Ni Recovery + Pd [g/t]/31.103 x $1,000/$8.00/22.04 x Pd Recovery/Ni Recovery + Au [g/t]/31.103 x $2,000/$8.00/22.04 x Au Recovery/Ni Recovery + Ag [g/t]/31.103 x $20.00/$8.00/22.04 x Ag Recovery/Ni Recovery

CuEq% = Cu%+ Ni% x $8.00/$4.00 x Ni Recovery/Cu Recovery + Co% x $20.00/$4.00 x Co Recovery/Cu Recovery + Pt [g/t]/31.103 x $1,000/$4.00/22.04 x Pt Recovery/Cu Recovery + Pd [g/t]/31.103 x $1,000/$4.00/22.04 Pd Recovery/Cu Recovery + Au [g/t]/31.103 x $2,000/$4.00/22.04 Au Recovery/Cu Recovery + Ag [g/t]/31.103 x $20.00/$4.00/22.04 x Ag Recovery/Cu Recovery

For Ni and Cu recoveries, please refer to the formulae in the November 2022 Technical Report. Recovery of Ni to the Cu concentrate was excluded from the NiEq calculation. The following recoveries were used for the other metals: 64.1% for Co, 82.5% for Pt, 69.3% for Pd and 72.6% for Au and Ag.

ABOUT TALON

Talon is a TSX-listed base metals company in a joint venture with Rio Tinto on the high-grade Tamarack Nickel Copper Project Tamarack Nickel-Copper-Cobalt Project located in central Minnesota. Talon’s shares are also traded in the US over the OTC market under the symbol TLOFF. The Tamarack Nickel Copper Project comprises a large land position (18km of strike length) with additional high-grade intercepts outside the current resource area. Talon has an earn-in right to acquire up to 60% of the Tamarack Nickel Copper Project and currently owns 51%.  Talon has a neutrality and workforce development agreement in place with the United Steelworkers union. Talon’s Battery Mineral Processing Facility in Mercer County was selected by the US Department of Energy for US$114.8 million funding grant from the Bipartisan Infrastructure Law and the US Department of War awarded Talon a grant of US$20.6 million to support and accelerate Talon’s exploration efforts in both Minnesota and Michigan. Talon has well-qualified experienced exploration, mine development, external affairs and mine permitting teams.

For additional information on Talon, please visit the Company’s website at www.talonmetals.com or contact:

FORWARD-LOOKING STATEMENTS

This news release contains certain “forward-looking statements”. All statements, other than statements of historical fact that address activities, events or developments that the Company believes, expects or anticipates will or may occur in the future are forward-looking statements. These forward-looking statements reflect the current expectations or beliefs of the Company based on information currently available to the Company. Such forward-looking statements include statements relating to future exploration work, including future drill holes, drill results, assays, geophysics and geological interpretations. Forward-looking statements are subject to significant risks and uncertainties and other factors that could cause the actual results to differ materially from those discussed in the forward-looking statements, and even if such actual results are realized or substantially realized, there can be no assurance that they will have the expected consequences to, or effects on the Company.

Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise. Although the Company believes that the assumptions inherent in the forward-looking statements are reasonable, forward-looking statements are not guarantees of future performance and accordingly undue reliance should not be put on such statements due to the inherent uncertainty therein.